Current position: Product list Product details
< >

Monochrome Graphic LCD 128x64, Display LCD 128x64

SC12864026-V30 is a graphic LCD display with a resolution of 128 * 64, which is equipped with ST7565R-G-1 IC, 30 PIN and 6 o’clock viewing direction.

  • Type: Graphic
  • Mode: FSTN
  • Product No: SC12864026-V30
  • Size: -
  • Resolution: 128*64
  • Outline Dimension: 56.4*36.8*5.5
  • Active Area: 51.0*23.8
  • Interface: -
  • IC: ST7565R
  • Brightness: -
  • Touch Screen: No
  • View Direction: 6
  • Pin No: 30
  • Shape: Rectangle
Inquiry Now

Introduction:

General Specification

 

ITEMSTANDARD VALUEUNIT
 NUMBER OF GRAPHIC128×64Mm
 MODULE DIMENSION56.4×36.8×5.5Mm
 VIEWING AREA51.0×23.8Mm
 DOT SIZE0.32×0.33Mm
 DOT PITCH0.35×0.36Mm
 LCD TYPEFSTN/ POSITIVE/TRANSMISSIVE
 DUTY1/64
 VIEWING DIRECTION0.25o’clock
 BACK LIGHT TYPESIDE LIT LED
 BACK LIGHT COLORWHITE
 APPROX. WEIGHTTBDG

Interface Definition

 

Pin No.SymbolLevelDescription
1CS1H/LChip select signal
2RSTH/LChip reset signal
3A0H/LRegister selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
4WR(R/W)H/L8080 series: Write signal
6800 series: Read or Write signal
5RD(E)H/L8080 series: Read signal
6800 series: Enable signal
6–13D0-D5
D6(SCL)
D7(SI)
H/LThis is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface (SPI-4) is selected (P/S = “L”) :
D7 : serial data input (SI) ;
D6 : the serial clock input (SCL).
D0 to D5 should be connected to VDD or floating.
14VDDSupply voltage for logic
15VSSGround
16VOUTPower for LCD
17C3+DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
18C1-DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
19C1+DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
20C2+DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
21C2-DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
22-26V4-V0This is a multi-level power supply for the liquid crystal drive.
27VRContrast adjustment input.
28C86H/LC86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface.
29PSH/LP/S = “H”: Parallel interface
P/S = “L”: Serial interface
30IRSH/LRS = “H”: Use the internal resistors
IRS = “L”: Do not use the internal resistors.


Technical support

Previous Product Previous Product : 122*32 Graphic STN LCD Displays

Next Product : 12864 COG FSTN Graphic LCD Display Next page