Drawing:
General Specification
| Item | Standard value | Unit |
| LCD Size | 2 | inch |
| Dot Matrix | 240(RGB) × 320 | pixel |
| Module Size | 35.60 × 50.20 × 2.10 | mm |
| Active Area | 30.60 × 40.80 | mm |
| Dot Pitch | 0.1275 × 0.1275 | mm |
| Pixel Configuration | R.G.B. Stripe | - |
| Color depth | 262K | - |
| Display Mode | Normally black, Transmissive | - |
| Technology Type | a-Si | - |
| Viewing Direction | All | - |
| Gray Scale Inversion Direction | All | - |
| Driver IC | ST7789V | - |
| Interface | 8bit MCU | - |
| LED Numbers | 4 LEDs | - |
| Weight | TBD | g |
Interface Definition
| Pin No. | Symbol | Type | Description |
| 1 | LEDK | P | LED driving cathode |
| 2 | LEDA | P | LED driving anode |
| 3 | GND | P | Ground |
| 4 | VCC | P | Power supply for system |
| 5 | VDDI | P | Power supply for I/O |
| 6 | RESET | I | Chip reset signal |
| 7 | CSX | I | Chip Select signal |
| Display data/command selection (RS) pin in MCU parallel interface. DCX='1': display data or parameter. | |||
| 8 | DCX | I | DCX='0': register index / command. |
| 9 | WR | I | Write signal |
| 10 | RD | I | Read signal |
| 45979 | DB0-DB7 | I/O | Data bus |
| 19 | TE | O | Tear effect output |
| 20 | GND | P | Ground |
| Note1: TYPE definition: | I-----Input O---Output P | Power/Ground |
Previous Product Previous Product : 2.0 inch IPS TFT LCD Display with 240x320 resolution, SPI, RGB interface, 51 Pin With ST7789V Controller
Next Product : 2.0 inch IPS TFT LCD Display with CTP, 24 Pin With ST7789V Controller Next page
