General Specification
| Item | Standard value | Unit |
| LCD Size | 2 | inch |
| Dot Matrix | 240(RGB) × 320 | pixel |
| Module Size | 36.60 × 51.20 × 3.75 | mm |
| Active Area | 30.60 × 40.80 | mm |
| Dot Pitch | 0.1275 × 0.1275 | mm |
| Pixel Configuration | R.G.B. Stripe | - |
| Color depth | 262K | - |
| Display Mode | Normally black, Transmissive | - |
| Technology Type | a-Si | - |
| Viewing Direction | All | - |
| Gray Scale Inversion Direction | All | - |
| Driver IC | ST7789V | - |
| Interface | 8bit MCU | - |
| LED Numbers | 4 LEDs | - |
| Weight | TBD | g |
Interface Definition
| Pin No. | Symbol | Type | Description |
| 1 | GND | P | Ground |
| 2 | DB7 | I/O | Data bus |
| 3 | DB6 | I/O | Data bus |
4 | DB5 | I/O | Data bus |
| 5 | DB4 | I/O | Data bus |
| 6 | DB3 | I/O | Data bus |
| 7 | DB2 | I/O | Data bus |
| 8 | DB1 | I/O | Data bus |
| 9 | DB0 | I/O | Data bus |
| 10 | RD | I | Read signal |
| 11 | WR | I | Write signal |
| 12 | Display data/command selection: | ||
| DC | I | DC=’1’: display data or parameter. DC=’0’: command data. | |
| 13 | CS | I | Chip Select signal |
| 14 | RESET | Chip reset signal | |
| 15 | VDD | P | Power supply for system |
| 16 | GND | P | Ground |
| 17 | LEDK | P | LED driving cathode |
| 18 | LEDA | P | LED driving anode |
| 19 | CTP-RST | I | CTP Reset signal |
| 20 | CTP-SDA | I/O | CTP I2C data |
| 21 | CTP-SCL | I | CTP I2C clock |
| 22 | CTP-INT | O | CTP Interrupt output |
| 23 | CTP-VDD | P | CTP Power supply |
| 24 | GND | P | Ground |
| Note1: TYPE definition: I-----Input O---Output P Power/Ground | |||
Previous Product Previous Product : 2.0 inch IPS TFT LCD Display with 240x320 resolution, SPI, RGB interface, 51 Pin With ST7789V Controller
Next Product : 0.85 inch IPS TFT LCD Display with 128x128 resolution, SPI interface, 51 Pin With ST7735S Controller Next page
